欧美在线视频,乱熟女高潮一区二区在线 ,女厕精品toilet,免费看成人啪啪

服務康邁中國業務，為公司內外客戶提供設計和工程服務。工作范圍包括但不僅限于設計、工程制圖、研
發、測試、樣件服務、項目管理、質量提升、供應商管理和現場支持；保證優異的生產質量，以實現最佳
的產品質量，簡化裝配，最大限度降低模具成本，縮短設計周期并提高生產效率。通過設計服務與美國設
計工程團隊、中國本土應用工程團隊和質量、運營團隊協作。

關鍵職責：

在工程副總裁的帶領下，依照政策、計劃、程序、指示和標準進行工程活動。Conducts engineering
activities in accordance with policies, plans, procedures, instructions, and standards under the direction of the Vice
President of Engineering.
? 了解并執行適用于本崗位的康邁質量方針。Understands and implements the ConMet Quality Policy as
applied to this job function.
? 持續改進，為康邁質量方針提供支持。Implements continuous improvement in support of the ConMet Quality
Policy.
? 參與跨部門質量規劃，滿足客戶要求。Participates in cross-functional Quality planning to fulfill customer
requirements.
? 根據所有客戶規范和質量要求進行設計工作。Conducts design activities based upon all available customer
specifications and quality requirements.
? 開展并記錄相關測試，包括：Conducts and document test activities which may include:
o 項目申請、項目計劃、項目批準 Project Proposal, Planning, and Approval
o 2D 繪圖、3D 建模（量產模和樣件模）、結構分析、應力分析、測試和結果解釋 2D
Drawing, 3D Modeling (permanent molds and prototypes), structural analysis, stress analysis, testing, and
interpretation of results.
o 給客戶提供技術支持、技術變更和解決方案等服務 Acting as Customer liaison for technical
support, changes, and solution proposal
o 在正式和非正式的設計評審中與康邁應用、生產、銷售和其他相關職能部門進行溝通
Interfacing with Application, Manufacturing, Sales and other ConMet functions both informally and in formal
Design Reviews.
o 設計校核、驗證和發布 Design Verification, Validation, and Release
o 產品和設計創新 Product and design innovation
? 根據工程程序和指導說明，識別、創建和管理職能范圍內的受控文件（即 ECR、圖紙、ECN、測試
報告、規范、設計評審記錄、BOM 等) Identifies, creates, and manages controlled documents within the
functional area in accordance with Engineering Procedures and Instructions. (i.e. ECRs, drawings, ECN’s, Test
Reports, Specifications, Design Review Minutes, BOM, etc.).
? 設計的發布，包括 FMEA、分析要求、公差疊加分析等 Facilitation of Design Releases including FMEA
activities, analysis requirements, tolerance stack-up studies, etc

向采購部提供采購訂單中包含的所有必要規范和要求，包括產品說明、供應商質量要求以及參考圖
紙和規范的現行修訂等級。Provides all necessary specifications and requirements to Purchasing for inclusion on
Purchase Orders, including product description, Supplier Quality Requirements, and reference to current revision
levels on drawings and specifications.
? 確認在產品發布前客戶擁有的模具符合所有規范 Verifies that customer owned tools meet all specifications
prior to release for manufacturing.
? 創建定義產品和流程規范、變更和規范偏差的技術狀態文件 Produces configuration documents that define
product and process specifications, changes, and deviations from specifications.
? 參與跨部門活動，包括 APQP/4DX/設計評審會議，供應商/客戶審核和內部質量審核 Participates in
cross-functional activities, including APQP, 4DX, design review meetings, external supplier/customer audit and internal
quality audits.
? 明確要做的測試、所需的測試設備和設施，以及使用 SPC 確定對過程差異敏感的特性 Specifies the
tests to be performed, test equipment and facilities required, and the use of SPC for characteristics identified to be
sensitive to process variance.
? 必要時參加材料評審會議，協助確定不合格件的原因。協助找出不合格件的糾正措施 Participates in
material review meetings as necessary to assist in determining the cause of non-conformances. Contributes to
corrective action in response to non-conformances;
? 參與工程、項目和質量體系的培訓，包括自主學習和按照工程經理要求的學習 Participates in
Engineering, Project and Quality System training, both self-directed and as directed by Engineering Management.
? 進行設計和測試，包括 FMEA、應力分析、疲勞分析、耐受堆疊概率和測試結果分析；明確 SPC 的
應用確定對過程差異敏感的特征 Conducts design and testing activities, which may include FMEAs, Stress
analysis, fatigue analysis, tolerance stack-up probability, and analysis of test results; specify the application of SPC for
characteristics identified to be sensitive to process variance.
? 參與研發和創新活動；支持跨職能開發和創新項目 Participates in R&D and Innovation activities; support
cross-functional development and innovative projects.
? 能及時和按時按照工作時間工作 Prompt and regular attendance as scheduled.
? 安全工作，不受傷害 Works safely and without injury.
? 可能會承擔其他職責 Other duties may be assigned.